Lamar parts manufacturing company

Self Aligning Ball Bearings

A self-aligning bearing is recommended when the alignment of the shaft and housing is difficult or when the shaft may bend during operation. Brda notes that similar to deep groove ball bearings, most self-aligning ball are for general use.
Depending on the series, most self-aligning bearings can be interchanged with standard ball bearing assemblies. (6200 and 6300 have direct interchanges with the 1200 and 1300 series). “However, if this is not possible, the self-aligning bearing may be wider or can have a tapered bore,” Brda explains.

Normal mounting and handling procedures for a cylindrical bore bearing should be followed. For the tapered bore, special care must be taken to ensure the bearing is driven up the taper the appropriate amount. Because matching the bearing to the specific application is critical, it is important to verify your application need with your selected vendor.

90 mm x 190 mm x 43 mm ISO 1318K+H318 self aligning ball bearings
0.072
3.25
45 mm x 85 mm x 23 mm ISO 2209K self aligning ball bearings
2.73 KGS
108
45 mm x 68 mm x 32 mm ISB GE 45 BBL self aligning ball bearings
Steel
Open Type
AST 1209 self aligning ball bearings
2.73 KGS
108
◂ Previous page Next page ▸
All Products Contact Now
Product Categories
Angular Contact Ball Bearings
Bearing Units
Cylindrical Roller Bearings
Deep Groove Ball Bearings
Needle Roller Bearings
Plain Bearings
Self Aligning Ball Bearings
Spherical Roller Bearings
Tapered Roller Bearings
Thrust Ball Bearings
Thrust Roller Bearings
Wheel Bearings
Thrust Bearings
Timken AP Bearings Assembly
608z Bearing
Skf 6205 Bearing
6006 2rs Bearing
Ucf204 Bearing
Tapered Roller Bearings Tapered Single Metric
Tapered Roller Bearings Tapered Single Imperial
Spherical Roller Bearings Steel Cage
Tapered Roller Bearings TDI Tapered Double Inner Imperial
Full Complement Cylindrical Roller Radial Bearings