Cylindrical Roller Bearings
Cylindrical roller bearings are available in a wide range of designs, series, variants and sizes. The main design differences are the number of roller rows and the inner/outer ring flanges as well as cage designs and materials.
The bearings can meet the challenges of applications faced with heavy radial loads and high speeds. Accommodating axial displacement (except for bearings with flanges on both the inner and outer rings), they offer high stiffness, low friction and long service life.
Cylindrical roller bearings are also available in sealed or split designs. In sealed bearings, the rollers are protected from contaminants, water and dust, while providing lubricant retention and contaminant exclusion. This provides lower friction and longer service life. Split bearings are intended primarily for bearing arrangements which are difficult to access, such as crank shafts, where they simplify maintenance and replacements.
- 85 mm x 150 mm x 36 mm SIGMA N 2217 cylindrical roller bearings
- 11000 kN
- 530 r/min
- 160 mm x 340 mm x 68 mm SKF NU332ECML cylindrical roller bearings
- Standard
- 1.75 Inch
- 190 mm x 260 mm x 33 mm ISO NU1938 cylindrical roller bearings
- 163 mm
- 158.5 mm
- SKF C 2217 KV + AHX 317 cylindrical roller bearings
- 163 mm
- 158.5 mm
- NSK 155PCR3001 cylindrical roller bearings
- 163 mm
- 158.5 mm
- 90 mm x 160 mm x 40 mm FBJ NJ2218 cylindrical roller bearings
- Standard
- 1.75 Inch
- 20 mm x 42 mm x 12 mm CYSD NU1004 cylindrical roller bearings
- 163 mm
- 158.5 mm
- AST N1024 M cylindrical roller bearings
- -
- Chain Sheave Type- 3
