Self Aligning Ball Bearings
A self-aligning bearing is recommended when the alignment of the shaft and housing is difficult or when the shaft may bend during operation. Brda notes that similar to deep groove ball bearings, most self-aligning ball are for general use.
Depending on the series, most self-aligning bearings can be interchanged with standard ball bearing assemblies. (6200 and 6300 have direct interchanges with the 1200 and 1300 series). “However, if this is not possible, the self-aligning bearing may be wider or can have a tapered bore,” Brda explains.
Normal mounting and handling procedures for a cylindrical bore bearing should be followed. For the tapered bore, special care must be taken to ensure the bearing is driven up the taper the appropriate amount. Because matching the bearing to the specific application is critical, it is important to verify your application need with your selected vendor.
- 40 mm x 90 mm x 33 mm ISO 2308K self aligning ball bearings
- 45 mm
- HMV 11 E
- 70 mm x 125 mm x 31 mm ISB 2214 self aligning ball bearings
- In Stock
- 140mm
- 85 mm x 210 mm x 52 mm SIGMA 10417 M self aligning ball bearings
- 89.297 mm
- 177.8 mm
- 45 mm x 68 mm x 32 mm ISB GE 45 BBL self aligning ball bearings
- Steel
- Open Type
- AST 1209 self aligning ball bearings
- 2.73 KGS
- 108
