Thrust Ball Bearings
Thrust ball bearings are manufactured as single direction (fig. 1) or double direction (fig. 2) thrust ball bearings. They are designed to accommodate axial loads only and must not be subjected to any radial load.
In addition to the bearings presented in this section, SKF supplies thrust ball bearings for special application requirements. This assortment includes bearings with Solid Oil and NoWear coated bearings.
A ball thrust bearing is a particular type of rotary ball bearing. Like other ball bearings, they permit rotation between parts, but they are designed to support a high axial load while doing this (parallel to the shaft). Higher speed applications require oil lubrication. Generally, they are composed of two washers (raceways) which may be grooved the rolling balls elements which are typically caged. As opposed to roller thrust bearings, ball thrust bearings can generally operate at higher speeds but at lower loads.
- 90 mm x 160 mm x 30 mm SKF NJ 218 ECM thrust ball bearings
- 3 mm
- 3200 r/min
- Toyana 51132 thrust ball bearings
- 0.01 KGS
- 24mm
- NKE 51213 thrust ball bearings
- 3/8 NPT
- 150 mm
- Toyana 52238 thrust ball bearings
- 32 mm
- 0.6 mm
- NSK 53224 thrust ball bearings
- 3 mm
- 3200 r/min
- ISB 51320 thrust ball bearings
- 12000
- 7220cdgb/p4a-skf
- Toyana 54234U+U234 thrust ball bearings
- 12 mm
- 430 min-1
- 120 mm x 170 mm x 15 mm NSK 54224U thrust ball bearings
- 12000
- 7220cdgb/p4a-skf