Thrust Ball Bearings
Thrust ball bearings are manufactured as single direction (fig. 1) or double direction (fig. 2) thrust ball bearings. They are designed to accommodate axial loads only and must not be subjected to any radial load.
In addition to the bearings presented in this section, SKF supplies thrust ball bearings for special application requirements. This assortment includes bearings with Solid Oil and NoWear coated bearings.
A ball thrust bearing is a particular type of rotary ball bearing. Like other ball bearings, they permit rotation between parts, but they are designed to support a high axial load while doing this (parallel to the shaft). Higher speed applications require oil lubrication. Generally, they are composed of two washers (raceways) which may be grooved the rolling balls elements which are typically caged. As opposed to roller thrust bearings, ball thrust bearings can generally operate at higher speeds but at lower loads.
- NACHI 53244 thrust ball bearings
- 3 mm
- 3200 r/min
- SKF BSA 203 C thrust ball bearings
- 32 mm
- 0.6 mm
- 40 mm x 90 mm x 23 mm SKF NU 308 ECM thrust ball bearings
- 3/8 NPT
- 150 mm
- INA D38 thrust ball bearings
- 3 mm
- 3200 r/min
- 95 mm x 190 mm x 24 mm NKE 54322-MP thrust ball bearings
- 12 mm
- 430 min-1
- 134 mm x 180 mm x 15 mm KOYO 239726B thrust ball bearings
- 12 mm
- 430 min-1
- NTN 81140 thrust ball bearings
- 0.02 KGS
- Steel
- ISO 52420 thrust ball bearings
- 12000
- 7220cdgb/p4a-skf
- ISB ZB1.20.0944.201-2SPTN thrust ball bearings
- 0.34 KGS
- 32
- Toyana 53410 thrust ball bearings
- 32 mm
- 0.6 mm
- AST 51324M thrust ball bearings
- 3 mm
- 3200 r/min